WaterRower PC Cable

There are three types of cable to suit the WaterRower;

S4 Software Cable- the Series 4 monitor the PC interface connector is a 6 Pin mini Din connector on the back of the monitor. This interfaces with your serial port on your PC. You may make the cable yourself by following our specifications or you may order directly through WaterRower

WRS004- Purpose made WaterRower PC Cable- US$20, £15, €20, AU$40

WRS150- USB Adapter allowing cable to be plugged into a USB port -US$20

S3 (later than version 1.8) Software Cable- the Series 3 model the PC interface connector is a 9 Pin serial connection on the back of the monitor. This interfaces with your serial port on your PC using a standard serial cable (or RS 232). You may make the cable yourself by following our specifications, you may order directly through WaterRower or purchase at the following locations

• In the US at Radio Shack (search for PN 26-117)

• In the UK at Maplin Electronics (search for code VD73Q)

• IN Australia Dick Smiths Electronics in Australia (search for Product Code X8406)

NOTE- older Series 3 monitors (early has the PC interface connector in the end of the spigot tube supporting the computer. This cable is purpose made and is available only through WaterRower.

WRS-003- Purpose made WaterRower PC Cable- US$20, £15, €20, AU$40

Please contact us for Software Cables for earlier models

S2 Software Cable- the Series 2 and early Series 3 (version 1.8 and earlier) monitor has the PC interface connector in the end of the spigot tube supporting the computer. You may make the cable yourself by following our specifications or you may order directly through WaterRower

WRS-002- Purpose made WaterRower PC Cable- US$20, £15, €20, AU$40

Please contact us for Software Cables for earlier models